Available to fit 3mm, 5mm, and 10mm LEDs.
LED Holders
Available in regular black plastic or a fancy metal chrome reflector (yes, real metal!).
Available to fit 3mm, 5mm, and 10mm LEDs.
Available to fit 3mm, 5mm, and 10mm LEDs.
LED Holders Photos
Action Shots
LED Holders Technical Info
| Size of Hole | |
| 3mm Chrome holders | 5.69mm |
| 5mm Chrome holders | 7.69mm |
| 10mm Chrome holders | 13.45mm |
| 3mm plastic holders | 5.20mm |
| 5mm plastic holders | 6.85mm |
Customer questions & answers
How big do I need to make the mounting hole for a 10mm LED holder
13.45 mm
Can I use this holder together with the pre-wired LED's you offer and be plug and play together?
I want to utilize a run of 2 to 4 single LED's to accent my front floorboard area in my vehicle, and run it fused to the parking light supply. The car is dreadfully dark at night. - by Stuart (Kentucky)
I want to utilize a run of 2 to 4 single LED's to accent my front floorboard area in my vehicle, and run it fused to the parking light supply. The car is dreadfully dark at night. - by Stuart (Kentucky)
Yes, the holders work with the prewired leds. They will fit inside and the holder will snap it into place.
do you need a resistor for this product or can you hook it up to 12 volt directly? - by Jim (Ocala, Fl.)
The holders just hold an led. If the led is prewired it already has a resistor wired in.
Customer Reviews
4 Reviews
Atleast they look better then a hole.
Stephen Lee Wiggins from Fort Wayne, IN
Tried the plastic type, using a step-bit I drilled the smallest hole possible that would allow the upper ring to slide in, then the led wouldn't fit in. Stepped up to a 1/4" hole and the LED would pop in but when I go to put the collar on underneath it doesn't lock in and the LED can just be pushed out.. Ended up having to glue the LED and holder with plastic epoxy to the plastic panel.. maybe 1/16" plastic is too thick of material for the collar to work correctly? Can't give this a great review.. only up-side I can give is, with the holder/ring it looks better then a LED just sticking out of a hole I guess.. Eitherway I used all 6 of them on my test box, your LEDs are freaking bright for sure
Just another good business...
Jimmy from Yigo, GU
Fit perfectly, always enjoy the business with Phil...thanks for such superb customer service...3 days only shipping!!! WOW.
Jeff Grant from Del Mar, CA
The chrome holders look very nice, but for them to work with the pre-wired LEDs, you'll need to glue the LED in place. If you're using regular "loose" LEDs, you won't have to glue anything.
Matthew Mosman from Waltham, MA
Well worth it for the chrome version. I normally do not like the look of just an LED on the dash but with these holders they look good. The chrome gives it more of a finished installed look. I used them with some of the pre-wired LEDs for a clean install. Would be great in your dash cluster for an indicator for your race car or every day car. Great product.