When powering from cigarette lighter it’s important to note the amount of power it can push out, check your vehicles owner manual to see if has enough power for connecting led lights to cigarette lighter.
Once you have that figured out, there are 2 ways you can go about installing your led lights:
- With this first method, your wiring will still be visible. Cut your cigarette plug’s wires and separate each of the wires. Strip off the rubber about 1 inch down and join the positive and negative wires to your led lights.
Or
- If you prefer to keep your plug open so you’ll still be able to use the cigarette lighter, you can use this method. You can get to the back of your plug through the dash of your car, there you should find 2 wires. Splice them and connect them to your led lights.
